|
The Scott ProPak is an open circuit, self-contained, compressed air breathing apparatus. It consists of a back plate, carrying harness and pneumatic system, consisting of a cylinder connector, reducer, pressure gauge, whistle and demand valve.
The ProPak can be configured in a number of different ways with single or dual cylinders. There are also a range of attachments available including Airline, Split Demand Valve Coupling (SDC), Rescue Second Man (RSM) and Decontamination.
The ProPak is used in conjunction with a range of composite or steel cylinders and the choice of Vision 3, Panaseal, Panavisor or Promask PP facemask.
Applications
The ProPak is specifically designed as a Professional Fire Fighting SCBA, but is also suitable for providing respiratory protection for any IDLH environment.
Approval Information
• CE marked in accordance with prEN137:2002 Class II
• CE marked in accordance with EN139 – sets fitted with CEN airline attachments
• AS1716
Materials
Pressure Reducing Valve
Rust Tube (Sabre Cyls)
Reducing Valve Seat
O-Rings
Reducing Valve Springs
HP Pressure Gauge
HP Pressure Gauge Cover
MP Air Supply Hose Fittings
Facemask
Facemask Visor
MP Air Supply Hose
HP Air Hose
Valve Handwheel (Sabre Cyls)
Harness
Backplate
Backpad
Cylinder Band
Strap Buckles
Cylinder
Cylinder Valve
Demand Valve Casing |
Nickel Plated Brass
Brass
Polyamide (Nylon)
Nitrile, Silicone, EPDM
Stainless Steel
Stainless Steel, Polycarbonate Lens
Neoprene
Nickel Plated Brass
Neoprene, Silicone or Procomp
Polycarbonate
Chlorinated Polyethylene, fabric braid reinforcement, Nitrile liner
PTCFE liner, stainless steel braiding, Estane sleeve
Glass filled Polyamide
Intrinsically flame retardant 100% Kevlar webbing and Nomex 3 fabric
Glass & Carbon filled Nylon composite
Flame retardant polyamide and closed cell Polyethylene foam
100% Kevlar
Stainless Steel, Brass
Steel or Composite
Nickel Plated Brass
Glass filled Polyacetal and Polyamide |
Maintenance/Servicing/Cleaning
N.B. - Cleaning should only be carried out as specified in the user instructions.
Maintenance and Servicing must only be performed by trained personnel following the procedures in the Service and Maintenance manual.
Technical Specifications
Tempest Demand Valve
Compact positive pressure demand valve featuring servo-assisted, tilting diaphragm mechanism with low inspiratory resistance and responsive dynamic performance, automatic first breath actuation and hands free bypass facility. Components injection moulded from Polyamide and Acetyl with rubber seals and diaphragms.
First breath activation -20 to -30 mbar
Peak flow performance In excess of 500 litres/minute
Bypass flow 150 litres/minute nominal
Static positive pressure 1.0 – 4.0 mbar
Reducing Valve
First stage pressure reducing valve featuring non-adjustable, spring loaded piston mechanism and outlet supply protected by pressure relief valve. Valve body and cap machined from nickel-plated brass with stainless steel spring and hose retainer U-clips.
Outlet pressure
200 bar inlet 5.5 to 9.5 bar
300 bar inlet 6.0 to 11.0 bar
Pressure relief valve protected Approx. 13.5 bar
Flow restrictor to gauge supply hose <25 litres minute
Pressure Indicator & Warning Whistle
Bourdon tube type dial indicator
Heat and Impact resistant Polycarbonate lens
Safety blow-out vent in rear of gauge - accuracy:- +/- 10 bar between 40-300 bar
Hoses
Stainless steel swivel hose fittings
Medium pressure hose
Maximum working pressure 16 bar
Minimum burst pressure 80 bar
High pressure hose
Maximum working pressure 450 bar
Minimum burst pressure 800 bar
Packing Specifications
Single 69x41x28cm 5kg
Duo 69x41x28cm 6kg
Weight/Dimensions
Single configuration (less cylinder) 3.0kg
Single configuration & facemask (less cylinder) 3.6kg
Length 600mm
Width 278mm
Depth (with 6.0 litre 207 bar cylinder) 200mm
Size: Details
|
Srpski